Yamaha pickup system - MC-9
Description
single piece!
Yamaha pickup system - MC-9
Yamaha pickup system - MC-9
- This item is unused in original packaging. Packing dusty.
- transducer principle: cross-matrix, moving coils (MC = moving coil)
- Needle roller: Aluminum blade tapering to the tip
- Needle type: 0.1 x 0.2 mm rectangular solid diamond needle with elliptical tip (8 x 20 µm)
- Aufh? lung: Einpunktlagerung
- Dampers: Equalization Dampers for V-H Compliance Adjustment
- Housing: Monoblock fittings cast in highly compacted special plastic
- Frequency response: 10 - 20000 Hz, cutoff frequency 50 kHz
- Channel Separation: 28 dB
- channel balance: 1 dB
- & Uuml; bersprechd & auml; attenuation:
- Output voltage: 0.3 mV (at 1 kHz, 5 cm / s, 45 ° peak)
- Terminator: 30 ohms of resistance
- Induction:
- Recommended contact pressure: 1.5 ± 0.3 g (At 20 - 25 ° C. If less than 20 ° C, set the room temperature to 1.8 g.)
- Vertical toe angle: 20 ± 2 °
- Needle compliance: dynamic: 11 x 10 -6 cm / dyme (horizontal), 9 x 10 -6 cm / dyme (vertical) and static : 21 x 10 -6 cm / dyme (each at 100 Hz, 25 ° C)