Programmable Thermostat with 3 Digit Digital Display
Description
Programmable Thermostat with 3 Digit Digital Display
Characteristics:
Temperature range: -50-110 ° C
Dimensions: 48.5 * 40 mm
Temperature control mode: ON / OFF
Resolution: When the temperature 0.1, the resolution is -9.9 to 99.9, the other temperature segment is 1 ?.
Accuracy: 0.1
Hysteresis accuracy: 0.1
Refresh rate: 0.5 s
High temperature protection: 0-110
Supply voltage: DC 12V
Static current: = 35MA, starting current = 65MA
Output voltage: DC 12V
Switching capacity: max 20A / 12VDC 15A / 230VAC 5A
Probe: NTC (10K 0.5%) Waterproof Sensor
Environmental Requirements: -10 ~ 60 ?, Humidity 20% -85%
Commissioning:
Connect the power supply to the screw terminals provided. 12V + / GND
The current temperature is now displayed.
Via the potential-free relay contacts K1 / K2 you can switch consumers.
Press the SET button. The display flashes.
Press - to set the desired temperature.
After setting, press SET to save the setting.
Display LED : The relay contact is open and the relay contact is closed.
Indication LL means that the sensor is not properly connected or defective,
HH the temperature is outside the measurable range, the relay will pull < br=""> high temperature protection.
Characteristics:
Temperature range: -50-110 ° C
Dimensions: 48.5 * 40 mm
Temperature control mode: ON / OFF
Resolution: When the temperature 0.1, the resolution is -9.9 to 99.9, the other temperature segment is 1 ?.
Accuracy: 0.1
Hysteresis accuracy: 0.1
Refresh rate: 0.5 s
High temperature protection: 0-110
Supply voltage: DC 12V
Static current: = 35MA, starting current = 65MA
Output voltage: DC 12V
Switching capacity: max 20A / 12VDC 15A / 230VAC 5A
Probe: NTC (10K 0.5%) Waterproof Sensor
Environmental Requirements: -10 ~ 60 ?, Humidity 20% -85%
Commissioning:
Connect the power supply to the screw terminals provided. 12V + / GND
The current temperature is now displayed.
Via the potential-free relay contacts K1 / K2 you can switch consumers.
Press the SET button. The display flashes.
Press - to set the desired temperature.
After setting, press SET to save the setting.
Display LED : The relay contact is open and the relay contact is closed.
Indication LL means that the sensor is not properly connected or defective,
HH the temperature is outside the measurable range, the relay will pull < br=""> high temperature protection.
