PA amplifier 480 Wmax - AMP300 MKII

PA amplifier 480 Wmax - AMP300 MKII

---

? max. 480 watts
? soft start
? 2 x LED VU meter
? electronic protection circuit
? fan cooling
? suitable for 48cm (19 ") rack installation - 2 U

The amplifiers of the new AMP series are powerful PA power amplifiers that give your audio signal the power it needs to reach a large
audience The amplifier is fed with sound via two RCA cinch input sockets and two 1/4" jack inputs. The audio signal finds its way to the speakers either via the two NL4 outputs; nge, the two 6.3 mm jack sockets or the screw terminals. This qualifies the new AMP series for a variety of locations and changing connection situations. The refurbished, improved version with a new front panel of our popular disco amplifier series impresses with a clean design that adequately represents the power of the amp It is made entirely of a from durable metal and is easily suitable for 48cm (19") rack installation.

Specifications:

Amplifier 2 x 240W
Electronic protection circuit against short circuit, DC offset, overheating and overload
2 recessed volume controls right + left (rotary knobs with grid)
ON/OFF switch with Control LED
2x LED Vumeter (10-digit blue/red) per channel
Fan cooling
Soft start
4x cinch and 2x 6.35mm inputs for AUX/mixer etc.
loudspeaker outputs via Speakon and 4mm~ terminals/squeezable
4 to 8 Ohm impedance
black housing with 2 handles
19" rack installation with 2 height units

Operating voltage: 230V/50Hz
Max. power at 4 ohms: 2 x 240W
Max. power at 8 ohms: 2 x 160W
THD at 1kHz : 1%
Frequency range: 20Hz - 20kHz , -0.5/+1dB
Signal-to-noise ratio : >89dB
Channel Separation: 56dB
Input level: 850mV
Input impedance: 20kOhm
Supply: 230V/50Hz
Dimensions LxDxH: 48.26 x 30x 9.5 cm
Weight: 4.3 kg