Model railway distributor TYPE 2 - DM426<
Description
Model railway distributor TYPE 2 - DM426
Thanks to the model railway distributor type 2, it is possible to conveniently wire underneath the model railway system. New consumers or sections of track can be quickly supplied with voltage via the high-quality screw terminals. All terminal points marked "A" are interconnected, just like all points marked "B". Next to each "A" terminal there is a "B" terminal so you can connect your consumers clearly without cable chaos. The status LEDs allow you to... You can see at any time whether there is voltage on the board or not, without having to measure. If both LEDs light up, there is an alternating voltage at "A" and "B". If only the green LED lights up, there is a direct voltage with plus on "A" and minus on "B". If only the yellow LED lights up, there is a DC voltage with plus on "B" and minus on "A".
Thanks to the model railway distributor type 2, it is possible to conveniently wire underneath the model railway system. New consumers or sections of track can be quickly supplied with voltage via the high-quality screw terminals. All terminal points marked "A" are interconnected, just like all points marked "B". Next to each "A" terminal there is a "B" terminal so you can connect your consumers clearly without cable chaos. The status LEDs allow you to... You can see at any time whether there is voltage on the board or not, without having to measure. If both LEDs light up, there is an alternating voltage at "A" and "B". If only the green LED lights up, there is a direct voltage with plus on "A" and minus on "B". If only the yellow LED lights up, there is a DC voltage with plus on "B" and minus on "A".
Technical information:
- - 12 terminal points - 6x "A" and 6x "B"
- Status LEDs
- Current carrying capacity per terminal - max. 6A
- Total current carrying capacity - max. 8A
- Maximum voltage - 30V AC/DC
- Cross section - max. 1.5mm²
- Dimensions approx. (L x W x H) - 75mm x 15mm x 13mm
- 2 drill holes for board attachment