LED KLS Laser Bar FX Light Set
- 4-in-1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and white strobe LEDs
- Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
- Ultra-light ideally suited for mobile use
- Crossbar with integrated DMX control unit and stand sleeve
- Comes pre-assembled with practical transport bag
- Convenient control via wireless foot switch and IR remote control
- 2 laser diodes project hundreds of red and green laser beams
- 2 rotating derbies for mirror ball effects with three bright LEDs (red, green and blue) each
- 2 spots three bright TCL LEDs (red, green and blue) each
- 4 white strobe LEDs
- Auto, music, master/slave and DMX mode
- 37 built-in auto and music show programs that include all 4 effect units
- Addressing and setting via control panel with 4-digit LED display
- Sound-control via built-in microphone with sensitivity control
- LED derbies and LED spots individually adjustable and interchangeable
- Swivel mounting brackets for truss mounting
- When fog is used, this effect becomes especially attractive
- Switch-mode power supply for operation between 100 and 240 Volts
- Feed-through output allows to power up to 8 devices
Tecnical specifikations:
| Power supply: |
100-240 V AC, 50/60 Hz |
| Power consumption: |
50 W |
| Laser classification: |
2M |
| Laser modules: |
Red 100 mW, green 30 mW |
| Wavelength: |
Red 650 nm, green 532 nm |
| LEDs: |
|
| Derby (2 x): |
3 x RGB, 1 W each |
| Spots (2 x): |
3 x TCL, 3 W each |
| Strobe: |
4 x white, 1 W each |
| Beam angle: |
13° (spots), 8° (strobe) |
| Flash rate: |
0-30 Hz |
| DMX channels: |
3/5/9/27 |
| DMX512 connection: |
3-pin XLR |
| Sound control: |
via built-in microphone |
| Dimensions (LxWxH): |
1320 x 145 x 320 mm |
| Weight: |
7.3 kg |
| Shipping weight: |
12.00 kg |
