Steering wheel remote control - CAN bus interface MERCEDES with Quadlock connector

General features

Universal interface for vehicles with CAN bus, K-bus and steering wheel remote control.

• more than 250 vehicle logs in memory
• more than 20 radio brands
• Vehicle is recognized automatically - self-programming
• Set the radio protocol manually or with the programming device
• Vehicle-specific plug-play cable sets available
• Radio-specific cables available
• Can be updated

Radios

Radios of the following brands are supported:

A radio-specific cable is required for connection; this must be ordered separately (see below)

• Alpine
• Blaupunkt
• Clarion
• JVC
• Kenwood
• Panasonic
• Pioneer
• Sony
• Zenec
• others see radio list

Steering wheel remote control functions

Continue to use steering wheel remote control with news radio, the following functions are possible (depending on vehicle):

• Volume control
• Break
• Change the source (FM-AM-CD-AUX)
• Mute
• Channel search
• Title
• Answer or hang up phone call

CAN BUS Services

In addition to the steering wheel remote control, further functions are possible (vehicle-dependent):

• Ignition
• Lighting / Ignition
• Reverse gear / back gear
• Speedsignal / speed pulse signal
• Handbrake / hand brake

Additional functions

Depending on the vehicle, additional functions are available

Audio menu

In some vehicles, the on-board computer can be operated using the SEEK button (e.g. Mercedes). After replacing the original radio, the on-board computer no longer works. The interface restores this function.

Telephone

In some vehicles, the original hands-free system can be operated using the telephone buttons. After replacing the original radio, the telephone buttons no longer work. The interface restores this function. The original hands-free system can then be operated together with an audio system.

Parking sensors

In vehicles with original parking sensors, the warnings no longer work after the original radio has been replaced. The interface reads the corresponding signals in the CAN BUS and outputs them via a buzzer (optionally available).

Amplifier (Ampli wake up)

On some vehicles with an original sound system with an amplifier, the activation of the amplifier no longer works as soon as the original radio is removed. The interface enables the sound system to be activated with an after-sales radio. dd >

Original Car Men & uuml; Control

On some vehicles, the date, time and other information are shown on the display of the original radio. The interface provides these functions again after the original radio has been exchanged for a post radio.

• Operating voltage: 10-16 VDC
• Quiescent current consumption: 0.001 A
• Operating current: 0.048 A
• Temperature range: -30 ° C - + 80 ° C
• Dimensions: 65 x 65 x 25mm

suitable for the following vehicles: