EUROLITE LED TMH FE-1800 Beam/Flower Effect
Description
Equipped with 18 x 12 W COB LED with RGBW colors, distributed in 6 segments
Each segment can be controlled individually via DMX
Flicker-free projection
20 or 40 DMX channels selectable
Functions: colored beams in R, G, B and W, preset colors, built-in program, strobe effect with variable speed, dimmer, sound-control, Master/Slave operation
Adjustable zoom movement - from narrow single beam to room-filling beams - via rotating lens
Different patterns and movements can be selected via DMX
Stepless RGBW color changing
Positioning within 540° PAN and 190° TILT
PAN-angle switchable between 540° and 360°
Dimmer speed (step response) adjustable
Automatic position correction
Exact positioning via 16 bit PAN/TILT movement resolution
DMX-controlled operation or stand-alone operation with Master/Slave function
Sound-controlled via built-in microphone
Control board with LC display for adjusting the DMX-starting address, PAN/TILT reverse, reset
Switch-mode power supply for operation between 100 and 240 volts
Power connection via Neutrik PowerCon jack and included power cable
Feed-through output allows to power up to 8 devices
DMX512 control possible via any commercial DMX controller
Each segment can be controlled individually via DMX
Flicker-free projection
20 or 40 DMX channels selectable
Functions: colored beams in R, G, B and W, preset colors, built-in program, strobe effect with variable speed, dimmer, sound-control, Master/Slave operation
Adjustable zoom movement - from narrow single beam to room-filling beams - via rotating lens
Different patterns and movements can be selected via DMX
Stepless RGBW color changing
Positioning within 540° PAN and 190° TILT
PAN-angle switchable between 540° and 360°
Dimmer speed (step response) adjustable
Automatic position correction
Exact positioning via 16 bit PAN/TILT movement resolution
DMX-controlled operation or stand-alone operation with Master/Slave function
Sound-controlled via built-in microphone
Control board with LC display for adjusting the DMX-starting address, PAN/TILT reverse, reset
Switch-mode power supply for operation between 100 and 240 volts
Power connection via Neutrik PowerCon jack and included power cable
Feed-through output allows to power up to 8 devices
DMX512 control possible via any commercial DMX controller