Description
CAN + is an electronic component with which the function terminal 15, i.e.: Plus 12 volt ignition, can be generated easily, quickly and inexpensively in vehicles with CAN-BUS control.
Suitable for the following vehicles:
BMW
- MINI (05 & gt;) - SERIES 1 (04 & gt;) - SERIES 3 (05 & gt;) - SERIES 5 (03 & gt;) - SERIES 6 (04 & gt;) - SERIES 7 (05 & gt;) - X1 (09 & gt;) - X3 (E83 & gt; 10) - X3 (F25 10 & gt;) - X5 (05 & gt;) - X6 (08 & gt;) - Z4 (05 & gt;)
DESCRIPTION
CAN + is used when a car radio, hands-free kit or navigation system is subsequently installed in vehicles with CAN-BUS control. When installing a hands-free system, the yellow cable (MUTE) must be used. from CAN + to the yellow or pink cable of the hands-free system (output). This ensures that a call can continue, even if the engine is switched off during the call.
OUTPUT: PARALLEL OUTPUT + 12 VOLT CONTINUOUS PLUS (30) 15 AMP. MAX (RED / BLUE CABLE) ACC (15) GENERATED BY CAN ++ 12 VOLT, 4 AMP. MAX. (BLUE CABLE) DIMENSIONS (BLACK CABLE)
Functioning
CAN + is automatically activated when you start the engine. After 3 seconds, CAN + supplies the subsequently installed accessory components with the necessary 12 volts Tension. If the engine is switched off, CAN + automatically interrupts the 12 volt supply after 10 seconds. the yellow cable Mute from CAN + must be connected to the Mute output of the hands-free system. This guarantees that After the engine has been switched off, the telephone connection is maintained until the end of the call. BEFORE INSTALLING CAN + THE ENGINE MUST BE SWITCHED OFF SO THAT CAN + CAN RECOGNIZE THE DATA REQUIRED FOR FUNCTION!