4-Point Tower Traverse - TQTR-4000 4-Point Traverseeam
Description
4-Point Tower Traverse - TQTR-4000 4-Point Traverse
TOWERTRUSS TQTR 4-point truss system The TOWERTRUSS TQTR is a 4-point aluminum truss system connected by four conical connectors, tenons and split pins. The TOWERTRUSS TQTR uses alloy EN-AW 6082 T6 (AlMgSi1 T6) with 20 mm struts for the highest load capacity. The advantage of conical connectors is that they lock with the seatbelt in a positive and form-fitting manner, thus guaranteeing the highest load capacity. The Quick-Lock system enables quick, efficient and visually appealing assembly with frequent assembly and disassembly. The four strap tubes are made of 50 mm aluminum tubing with 4 mm wall thickness and give this system an excellent weight-to-weight ratio. The struts have a diameter of 20 mm at 2 mm wall thickness and leave plenty of play for hanging couplers, hooks and clamps. Outer dimensions of 290 mm are a stable truss system for high loads and long life. This truss system is designed primarily for the construction of Tower Systems I and II as well as for intensive use in construction, exhibition construction and event technology. The production of this truss system is supervised by the customer. The load table as calculation basis can be downloaded before buying in the Internet! Please note: This truss system must never be combined with other systems!
TOWERTRUSS TQTR 4-point truss system The TOWERTRUSS TQTR is a 4-point aluminum truss system connected by four conical connectors, tenons and split pins. The TOWERTRUSS TQTR uses alloy EN-AW 6082 T6 (AlMgSi1 T6) with 20 mm struts for the highest load capacity. The advantage of conical connectors is that they lock with the seatbelt in a positive and form-fitting manner, thus guaranteeing the highest load capacity. The Quick-Lock system enables quick, efficient and visually appealing assembly with frequent assembly and disassembly. The four strap tubes are made of 50 mm aluminum tubing with 4 mm wall thickness and give this system an excellent weight-to-weight ratio. The struts have a diameter of 20 mm at 2 mm wall thickness and leave plenty of play for hanging couplers, hooks and clamps. Outer dimensions of 290 mm are a stable truss system for high loads and long life. This truss system is designed primarily for the construction of Tower Systems I and II as well as for intensive use in construction, exhibition construction and event technology. The production of this truss system is supervised by the customer. The load table as calculation basis can be downloaded before buying in the Internet! Please note: This truss system must never be combined with other systems!