LED strip warm white with 2 PIR sensors 2 x 1.25m incl. Power supply, - bed lighting
Description
LED strip warm white With 2 PIR sensors 2 x 1.25m incl. Power supply - bed lighting
You just have to have that. Have they ever been up in the dark and have hit their toe at the bed post? After the installation which is the same as the one you are using (it is only inserted and glued), this does not happen to you again. The bed lighting will start automatically when you get out of bed and automatically turn off after about 90 seconds. Technical details:
You just have to have that. Have they ever been up in the dark and have hit their toe at the bed post? After the installation which is the same as the one you are using (it is only inserted and glued), this does not happen to you again. The bed lighting will start automatically when you get out of bed and automatically turn off after about 90 seconds. Technical details:
- white PCB with 75LEDs (150x)
- can be cut off every 5cm at marked places
- Easy assembly: self-adhesive strippers and sensors
- Luminous flux 600lm per stripe (1200lm)
- Power 12W
- Light color warm white;
- Color temperature 2900K
- LED Type: 2835, 75 LEDs per stripe (1.20m)
- Light angle 120 °
- Voltage 12V =
- 100% Bright 0.01 sec.
- On / Off 20,000x
- Light duration 25,000 hrs.
- Power factor: depending on the power supply
- RA> 70
- Mercury Hg 0.0mg
- Size: 1250x8x3mm
- Energy efficiency class A
- Consumption / 1000h 12kWh
- dimmable
- Range PIR sensor approx. 3m
- Day / Night Sensor - Turns on at night only
- Not suitable for accent lighting or room lighting - only decoration light