iM Kreisstück für Ø 4,0m 90°

The main load-bearing tubes of the iM-type trusses are special aluminium tubes with an outer diameter of 48.3 mm. They are the prerequisite for easy combination with standard scaffolds and for the use of standard couplings according to specification. The iM-type is our universal truss combining compact design and excellent load-bearing capacity. The iM-Typ-Truss (with a square section) are characterized by high security kink in compact form. Because of the diagonal bracing from all 4 sites are particularly suitable for exterior building, where combined loads are to be included, or as a vertical truss in Tower systems.

 

At all M-type corners of Global Truss engineered by Camco the connectors for the two horizontal outlets towards the main load-bearing tubes are splinted - the connectors for the other horizontal and vertical outlets are welded on.

 

Now look at the corner in that way, that in horizontal mounting, the splinted male connectors are in 12-o'clock position. For male connectors at the 12-o'clock position, please add "M" (male) to the classification after the hyphen (for example MC-M). If there are no connectors at the 12-o'clock position, please add "0" (for example: MC-0). After that please add at the corresponding second, third and fourth position after the hyphen "M" (male), "F" (female), "0" (no connector) for the horizontal outlets at the 3 o'clock, 6-o'clock and 9-o'clock position. For example: MC-MM0F.

 

If the corner has additional vertical outlets, please add them in the same way after another hyphen to the classification. At first position the outlet downward, at the second position the outlet upward. Also here please add "0" if there is no connector. For Example: MC-MFFM-0F. If there are following after a "0" on the same level further zeros, those will be missed out. For example: MC-MF00 = MC-MF, MC-M000-F = MC-M-F